Jaw crusher In the process of breaking the ore, the unbalanced inertial force on the moving parts of the jaw crusher will generate additional dynamic pressure on the motion pair, resulting in a number of adverse effects on the operation of the equipment, such as reducing the accuracy of the equipment And operational reliability, generating impact loads in the drive system, exacerbating wear and reducing equipment efficiency. When the jaw crusher in this situation, the user can use the following methods.

We should pay attention to jaw crusher equipment in the switch machine, should pay attention to regular jaw crusher, check the machine's internal wear, such as the center into the tube, cone cap, impeller, the lower runner liner, round guard , The wear of the wear block, the timely replacement of wear parts more serious, these parts to repair. Also pay attention to the weight of the replacement parts of the model and size, etc., must be replaced by the original part parameters.

Jaw crusher is a large machine equipment, users should pay attention to jaw crusher parts wear. For example, jaw crusher conveyor belt is an indispensable in the stone production line, the machine is driven by the transmission of credit. Regularly adjust the degree of tightening the conveyor belt to ensure uniform transmission belt. When the two motors are driven, the triangular tape on both sides should be grouped so that the length of each group is as uniform as possible. If you find the extent of the belt wear too much, please replace the time.