Product Overview:

Water jacketed centrifuge in the use of traditional mineral processing centrifuge of the principle of mineral processing at the same time, but also unique in the surface of the mineral processing parts of the application of recoil pressure water to overcome the traditional centrifugal concentrator in the mineral processing process, due to mineralization, resulting in mineral processing A drawback of a decline in tax rates. This new feature is achieved by adding a water jacket to a special way in a centrifuge.

The beneficiation test showed that the recovery rate of heavy ore and heavy ore in tin ore, lead ore, antimony ore, silver mine and gold mine with particle size of less than 4mm could reach more than 90%. In the case of heavy ore with particle size less than 2.5mm, Heavy ore recovery rate of 92% or more.

Product structure and principle:

Working principle machine construction:

Water jacket centrifugal concentrator is composed of ore pipe, rack, tailings tank, drive motor, vertical axis and mineral processing components and other components.

The ore-forming parts are divided into inner and outer layers, the inner layer is a conical cone, the inner vertebral body is made of stainless steel, with a ring grid, the cone wall has many small holes, the outer layer is made of ordinary steel, Layer to form a closed water jacket.

In the shaft for the hollow shaft, the pressure of water through the hollow shaft into the inner and outer layers of the formation of the water jacket, the inner hole constantly spray water into the grid between the formation of the backwash, sorting process, the recoil Pressure: 0.03-0.06MPa.

After grinding or sieving the ore particles from the upper part of the ore through the center to the ore pipe, into the beneficiation components, in the high-speed rotation under the centrifugal force, the pulp along the cone upward movement, light minerals from the upper part of the cone to the Tailings, discharged from the tailings discharge; heavy minerals in the role of centrifugal force, deposited in the grid, in fact, is deposited on the cone.

Through the results of mineral processing and many years of production practice proved that water jacket centrifuge failure rate is low, easy to operate, easy to repair.

In the election of the application of the machine can replace the mercury mixed operation, to eliminate the harm of mercury on the human body is conducive to environmental protection, in line with national environmental policy, far-reaching.

The machine has the ability to recover the single gold, especially for the recovery of fine gold monomer is remarkable, the technical indicators are better than other re-election equipment, which is the centrifugal mineral processing equipment development and development of a major breakthrough.

Compared with foreign similar products, the equipment is low in cost and easy to be popularized in China, which is beneficial to the improvement of mine economic benefit.

1. Belt drive 2. Motor 3. Equipment shell 4. To the mine pipe 5.6mm thick stainless steel inner compartment compartment 6. Pressure water jacket

7. Tailings row 8. Shock absorber 9. Rack 10. Concentrated ore discharge port 11. Hollow shaft 12. Recoil pipe

The motor 2 is driven by the belt drive 1 to drive the hollow shaft 11. The inner casing 5 is rotated at a high speed, and the mineral material enters the inner casing 5 through the ore pipe 4, and the mineral material is fully centrifuged and centrifuged. In the casing compartment 5. The light minerals are discharged through the tailings row 7, and the discharge is discharged from the concentrate 10 and then into the next cycle.

Triangle hanging water jacket centrifuge is a new type of water jacketed gold centrifuge, different sand gold and rock gold tailings have a good selection effect. Gold water bottle centrifuge is one of the modern re-election equipment. Because of its large processing capacity, sorting a wide range of particle size, simple operation and maintenance, as rough selection or selection is widely used in the selection of gold, tin, tungsten, titanium, red iron and so on.

Gold water bottle centrifuge is based on the law of centrifugal force, in the traditional centrifuge on the basis of the development and improvement of a energy-saving equipment, to ease the role of inhalation, so that the heavy mineral particles in the settlement, greatly improving the equipment selection Than the ability and recovery rate, the recovery rate of up to 90 or more.

The recovery rate increased Sn: 3.01%, W: 5.5%, Pb: 1.63%, Zn: 2.04; water consumption decreased by 30% -40%, the area reduced by 1/3, and the stroke can be adjusted due to the use of electromagnetic speed The motor is adjusted so that the bucket is steplessly adjusted. Its performance to the domestic advanced level, is currently one of the ideal energy-saving re-election equipment.

In the election of the application of the machine can replace the mercury mixed operation, to eliminate the harm of mercury on the human body is conducive to environmental protection, in line with national environmental policy, far-reaching.

Product Application:

Through the results of mineral processing and many years of production practice proved that water jacket centrifuge failure rate is low, easy to operate, easy to repair.

In the election of the application of the machine can replace the mercury mixed operation, to eliminate the harm of mercury on the human body is conducive to environmental protection, in line with national environmental policy, far-reaching.

The machine has the ability to recover the single gold, especially for the recovery of fine gold monomer is remarkable, the technical indicators are better than other re-election equipment, which is the centrifugal mineral processing equipment development and development of a major breakthrough.

Compared with foreign similar products, the equipment is low in cost and easy to be used in China, which is beneficial to the economic benefit of the mine.

Product specifications and technical parameters: